<![CDATA[固件加载错误]]>使用taixin-fmac-linux-driver-v2.2.1-38772编译驱动使用，加载hgSDK-v1.6.4.5-39706-fmac编译出的固件时出现大量报错

[  584.149683] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!

[  584.166557] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2

[  584.177113] hgic_bootdl_cmd_enter:290::failed! ret:2

[  584.266661] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!

[  584.283506] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2

硬件固件版本：hgic fw info:1.5.9.5, svn version:19932, app version:0

===================================================

另外，hgic_def.h文件hgic_bootdl_cmd_hdr里定义unsigned char   addr[4]，在实际fwdl.c文件中却有

#define BOOT_CMD_KEY        "@huge-ic"

#define BOOT_CMD_KEY_SIZE   8

造成274行 memcpy((void *)cmd_hdr->addr, (void *)BOOT_CMD_KEY, BOOT_CMD_KEY_SIZE);

报错

 [   28.861988] memcpy: detected field-spanning write (size 😎 of single field "(void *)cmd_hdr->addr" at /hgic_fmac/utils/fwdl.c:274 (size 4)

]]>https://nodebb-preview.taixin-semi.com/topic/15/固件加载错误RSS for NodeWed, 22 Jul 2026 08:47:07 GMTWed, 07 Jan 2026 16:35:57 GMT60<![CDATA[Reply to 固件加载错误 on Mon, 26 Jan 2026 18:24:09 GMT]]>ScreenShot_2026-01-26_182311_424.png

]]>https://nodebb-preview.taixin-semi.com/post/66https://nodebb-preview.taixin-semi.com/post/66Mon, 26 Jan 2026 18:24:09 GMT<![CDATA[Reply to 固件加载错误 on Sun, 25 Jan 2026 18:00:42 GMT]]>方便留下微信？可以远程看一下

]]>https://nodebb-preview.taixin-semi.com/post/65https://nodebb-preview.taixin-semi.com/post/65Sun, 25 Jan 2026 18:00:42 GMT<![CDATA[Reply to 固件加载错误 on Fri, 23 Jan 2026 18:21:41 GMT]]>H模组这边是正常的启动了么？是否有带flash呢？

识别到hg0设备应该是正常启动，并且可以通讯了，只是日志大量报错

flash是外置的Winbond 25Q80D，通过串口烧录固件也没问题，已经刷入最新的v2.4.1.5-39777，insmod后也能识别打印出版本来，问题还是出在驱动上

有劳指教下

]]>https://nodebb-preview.taixin-semi.com/post/64https://nodebb-preview.taixin-semi.com/post/64Fri, 23 Jan 2026 18:21:41 GMT<![CDATA[Reply to 固件加载错误 on Thu, 22 Jan 2026 20:01:54 GMT]]>76a95d30f8be711f5248c14d03186eea.png

hgic_bootdl_cmd_enter:290::failed! ret:2从驱动的代码上看返回的错误码，对应的是返回了错误的addr。

AH模组这边是正常的启动了么？是否有带flash呢？

]]>https://nodebb-preview.taixin-semi.com/post/63https://nodebb-preview.taixin-semi.com/post/63Thu, 22 Jan 2026 20:01:54 GMT<![CDATA[Reply to 固件加载错误 on Fri, 09 Jan 2026 15:31:05 GMT]]>测试环境为openwrt 24.10，硬件mt7688an，加载驱动后日志如下：

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.024971] hgic_bootdl_cmd_enter:290::failed! ret:2

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.078890] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.095704] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.106458] hgic_bootdl_cmd_enter:290::failed! ret:2

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.288022] hgicf_delay_init:850::delay_int run again!

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.299439] hgicf_download_fw:747::Enter

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.323702] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.340588] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.351549] hgic_bootdl_cmd_enter:290::failed! ret:2

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.413086] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!

Fri Jan  9 15:27:31 2026 kern.warn kernel: [  918.429911] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2

如此反复。。。

固件文件hgicf.bin用串口烧录是没问题的

]]>https://nodebb-preview.taixin-semi.com/post/60https://nodebb-preview.taixin-semi.com/post/60Fri, 09 Jan 2026 15:31:05 GMT<![CDATA[Reply to 固件加载错误 on Fri, 09 Jan 2026 14:32:22 GMT]]>感谢解答，主楼提到的firmware升级报错的问题如何解决呢？目前尝试修改hgic_bootdl_cmd_hdr里定义unsigned char   addr[4]为unsigned char   addr[8]，仍然无法完成fw_file的成功写入。

]]>https://nodebb-preview.taixin-semi.com/post/59https://nodebb-preview.taixin-semi.com/post/59Fri, 09 Jan 2026 14:32:22 GMT<![CDATA[Reply to 固件加载错误 on Fri, 09 Jan 2026 12:43:18 GMT]]>您是老客户啊，有这么老的固件，如果有微信群，在微信里沟通更方便些

]]>https://nodebb-preview.taixin-semi.com/post/58https://nodebb-preview.taixin-semi.com/post/58Fri, 09 Jan 2026 12:43:18 GMT<![CDATA[Reply to 固件加载错误 on Fri, 09 Jan 2026 12:42:31 GMT]]>Linux驱动打印event list is full (max 16), drop old event，是由于主控没有读走event队列导致队列满了，是正常现象，可以忽略这个打印。

]]>https://nodebb-preview.taixin-semi.com/post/57https://nodebb-preview.taixin-semi.com/post/57Fri, 09 Jan 2026 12:42:31 GMT<![CDATA[Reply to 固件加载错误 on Thu, 08 Jan 2026 20:18:21 GMT]]>Thu Jan  8 20:11:31 2026 kern.warn kernel: [  202.900434] hgicf_rx_fw_event:47::event id:7

Thu Jan  8 20:11:31 2026 kern.warn kernel: [  202.909114] hgicf_rx_fw_event:70::event list is full (max 16), drop old event

]]>https://nodebb-preview.taixin-semi.com/post/55https://nodebb-preview.taixin-semi.com/post/55Thu, 08 Jan 2026 20:18:21 GMT<![CDATA[Reply to 固件加载错误 on Thu, 08 Jan 2026 11:04:58 GMT]]>怀疑版本差异过大，尝试将模块固件升级到了最新的v2.4.1.5-39777，配合驱动版本：taixin-fmac-linux-driver-v2.2.1-38772，仍然出现大量log：

[  994.221985] hgicf_rx_fw_event:70::event list is full (max 16), drop old event

结合日志应该是驱动一直在尝试download_fw造成，虽然按照手册”泰芯Linux_WiFi_FMAC驱动开发指南.pdf“，加载驱动时并未指定fw_file=xxx.bin但是驱动并未判断文件是否真实存在，一直尝试加载默认的hgicf.bin。。。

期待修复

]]>https://nodebb-preview.taixin-semi.com/post/54https://nodebb-preview.taixin-semi.com/post/54Thu, 08 Jan 2026 11:04:58 GMT<![CDATA[Reply to 固件加载错误 on Wed, 07 Jan 2026 18:10:49 GMT]]>另外，日志中出现大量的

[  994.221985] hgicf_rx_fw_event:70::event list is full (max 16), drop old event

固件版本：hgic fw info:1.5.9.5, svn version:19932, app version:0

驱动版本：taixin-fmac-linux-driver-v2.2.1-38772 编译ko

]]>https://nodebb-preview.taixin-semi.com/post/53https://nodebb-preview.taixin-semi.com/post/53Wed, 07 Jan 2026 18:10:49 GMT